Toyota Tundra 2nd gen 3D-printed parts
71 free models that name the Toyota Tundra 2nd gen (2007–2021), by its generation or its years. Parts that just say Tundra are on every Tundra part.
Add a part
Before you print
- Every model here is someone else's work. Download it from the creator's page, and give them a like while you're there.
- Licenses vary. Dashed tags are non-commercial or personal-use only: print them for your rig, don't sell them. A few are files attached to forum posts with no license stated; those link to the thread.
- Print in PETG, ASA or nylon. PLA goes soft in a cab in July. Check fitment against your old part before you print ten.
Toyota Tundra 2nd gen parts
71 parts-
Rear vent extensionTundra 2.5 gen, extends the rear floor vent -
Small can insert2nd gen Tundra, cup holder -
Trim clipMany Toyotas. Used on a 2007 Tundra, fender liner to bumperNylon. PETG split in one orientation. -
Ashtray phone mountTundra and Sequoia 2000–2007, mounts in the ashtray -
Shift knob2nd gen Tundra 2007–2021, ball or square shape -
Blank switchTundra 2nd gen, dash switch blank -
Side mirror gearSequoia 2001–2007, side mirror repair gear -
Ashtray EDC mountTundra and Sequoia 2000–2007, EDC mount in the ashtray -
Rear vent extensionTundra 2.5 gen, extends the rear vent -
Rear dash cam clip mountTundra 2007 to 2022+, clip mount for a rear dash camera -
Headrest rear camera mountTundra 2020, rear camera mount on the headrest -
Antenna grommetTundra 2013, antenna grommet -
SP9100 overhead mountTundra 2014 to 2021, overhead mount for an SP9100 switch panel -
Stanley cup holder adapterSequoia 2001–2007, drops into a front cup holder so a Stanley stays upright -
Rear cup holder baseSequoia 2008 to 2013, rear cup holder base assembly -
Overhead console mountTundra 2.5 gen, mount for the overhead console -
Switch insert with phone ball mountTundra 2nd gen, switch blank insert with a phone ball mount -
Center console for bench seatTundra 2.5 gen with bench seat, center console -
Rear camera mountTundra CrewMax 2007 to 2021, rear camera mount -
Rear dash cam mountTundra 2014–2020, rear dash cam mount -
Bed molding capTundra 2nd gen, bed molding cap (66257-0C050) -
Cup holder spacerTundra 2nd gen, cup holder spacer -
Rear bumper dome caps2nd gen Tacoma 2005–2015 and Tundra 2000–2006, replaces the OEM bumper caps -
SP9100 switch panelTundra 2.5 gen, mounts an SP9100 switch panel -
Wireless charging console traySequoia 2008, wireless charging tray for the console -
Dash cup holder insertToyota Tundra 2nd gen, dash cup holder insert -
Coin slot fillerTundra 2nd gen 2007 to 2013, filler for the coin slot -
Armrest capToyota Sequoia 2007, armrest cap -
Bed cover crossbar anchor clipTundra 2019 with Extang tri-fold cover, crossbar anchor clip -
Cup holder insertsToyota Tundra 2017 6 passenger, cup holder inserts -
Brake controller panelTundra 2015, panel for a Tekonsha P3 brake controller -
No-drill front plate mountTundra gen 2.5, front license plate mount without drilling -
TSS relocation mountToyota Tundra 2018, relocation mount for the TSS sensor -
Brake controller panelToyota Tundra 2015, panel for a Tekonsha P3 brake controller -
Grille camera mountTundra 2020 TRD, camera mount in the grille -
TRD skid plate spacerTundra 2.5 gen, spacer for the TRD skid plate -
Mic mountTundra 2014 to 2021, radio mic mount -
Center bearing toolTundra 2007 to 2021, center bearing tool -
Mason jar holder2016 Tundra double cab, rear center cup holder -
MagSafe phone mountTundra 2015, MagSafe phone mount -
Rear seat delete brackets2007–2013 Tundra CrewMax, for removing the 40 percent side of the rear bench -
Yellow dash clip2007 Tundra dash clip, the yellow one Toyota uses all over the dash 90467-10203ABS. -
Tailgate lock solenoid bracketTundra 2015, tailgate lock solenoid bracket -
Nalgene cup holder adapterTundra 2015, cup holder adapter for Nalgene bottles -
TSS relocation mountTundra 2018, relocates the Toyota Safety Sense module -
Hydro Flask holderTundra 2018, cup holder for a 20 oz Hydro Flask -
Cup holder adapterTundra 2018 6 seater, cup holder adapter -
Rear cup holderTundra 2007-2013, rear cup holder -
Cup holderTundra 2014, cup holder -
Climate vent ring coverTundra 2014 on, climate vent ring cover -
Dash phone holderTundra 2014-2020, dash phone holder -
Headlight washer shimSequoia 2018 on, headlight washer shim for a headlight retrofit -
Dash cup holder insertTundra 2nd gen, dash cup holder insert -
Console switch panelGen 2.5 Tundra, console switch panel -
Window clip2nd gen Tundra, window clip -
Armrest cap2007 Sequoia, armrest cap -
Stake hole cover2007–2013 Tundra, bed stake hole cover -
Phone mount2nd gen Sequoia, phone mount -
Tailgate handle2010 Tundra, tailgate handle -
Rear console panelGen 2.5 Tundra 2014–2021, rear console panel -
Cup holder inserts2017 Tundra 6-passenger, cup holder inserts -
Overhead console panel2017 Tundra, overhead console panel -
Cup holder adapterGen 2 Tundra, cup holder adapter -
Tailgate handle (remix)2010 Tundra, tailgate handle -
Center console rear panel2nd gen Tundra, center console rear panel -
Coin holder phone mount adapter2007 Tundra, turns the coin holder into a phone mount -
MagSafe phone mount charger2nd gen 2WD Tundra, MagSafe phone mount -
TRD Pro grille insert2007–2013 Tundra, TRD Pro style grille insert -
Console change box2.5 gen Tundra 6-seat console, sized for the small flip-up door -
Dash wireless charger fairing2nd gen Sequoia, center dash fairing that holds two wireless chargers -
Rear USB bracket2019 Sequoia Platinum, swaps the rear RCA module for USB-C ports
Any make
2 partsParts that fit more than one make. Measure before you print.
-
Grille clipIsuzu, Toyota, Mazda and Mitsubishi grilles Isuzu 8942180270 · Toyota 90467-13011 -
Push-in rivet clip, 6 to 10 mmAny make. Measure the hole and the panel
Nothing for this model yet. Send us one.
Questions
Are these Toyota Tundra 2nd gen parts free?
Yes. All 71 are free to download from the creator's page. 33 of them are personal or non-commercial use only, so print them for your own rig and don't sell them. The license is on every row.
How do I find the right part for my Toyota Tundra 2nd gen?
Check the years and trim in what each part fits, match the OEM part number where it's listed (1 of the 71 have one), or compare the old part with the preview photos.
What filament should I print these in?
PETG, ASA or nylon for anything in the cab or under the hood. PLA goes soft in a hot cab, so save it for a test fit. Print one, check the fit, then print the rest.
Where do the files come from?
Thingiverse, Printables, MakerWorld, Cults3D, Thangs, Creality Cloud, MyMiniFactory and owner forums. LRDT doesn't host the files; every part links to its creator's page.
Send us one
Know a part we're missing?
Drew one yourself, or found one that saved your weekend? Send the link. We check the fit and the license, then add it here with the creator's name on it. FJ Cruiser trim clips, JL and Gladiator hardtop clips, 2nd-gen Trooper push clips and Patrol clips are the gaps we'd most like to fill.
Got it
We'll check the fit and the license, and if it's good it goes up with the creator's name on it.