Free Parts / Mercedes
Mercedes parts
215 free models for the G-Class and the Sprinter. The G-Wagen side covers the W460 and W461 (and the Puch G) and the W463. On the van side, T1N is 2002 to 2006, NCV3 is 2007 to 2018 and VS30 is 2019 on, and the Dodge and Freightliner Sprinters are the same van.
Add a part
Before you print
- Every model here is someone else's work. Download it from the creator's page, and give them a like while you're there.
- Licenses vary. Dashed tags are non-commercial or personal-use only: print them for your truck, don't sell them. A few are files attached to forum posts with no license stated; those link to the thread.
- Print in PETG, ASA or nylon. PLA goes soft in a cab in July. Check fitment against your old part before you print ten.
Top picks
Mercedes
Mercedes parts
215 parts-
Door trim panel clipSprinter rear door card clip (the green OEM style); fits many other vansPETG for heat; needs supports. -
OtterBox phone holderMercedes, for phones in large cases -
Side door stopSprinter sliding side door, holds it partway open -
Dash hatch prop and latch2019 on Sprinter dash accessory compartment, holds the lid open for cordsFive pieces glued together; STEP files included. -
Phone holderVS30 Sprinter 2018–2019, dash phone holder -
Phone holderMercedes, sized for 10 phone models -
Charger cable holderVS30 Sprinter 2019+ with dash vents, center console charger nook -
RAM ball mountMercedes, dash mount for RAM accessories -
RAM ball mountMercedes, left and right sides -
Small cup holder adapterSprinter, adapts the small cup holder for big cups -
Washer fluid tank capW901 to W906 Sprinter (also Vito and Viano W639), 74 mm washer reservoir A1248690172TPU. Scale to 98% for a snug fit. -
iPhone 14 holderSprinter, holds an iPhone 14 -
Phone mount for iPhone 12 with caseSprinter VS30, dash mount for an iPhone 12 or 12 Pro in a case -
iPhone 13 Pro Max holderLater Sprinter models, passenger side -
Dash vent bladesT1N Dodge and Mercedes dash vents, left and right blade setsDark gray ASA is a close color match. H versions take a spring and pin for in-dash repair. -
Gyro can holderMercedes -
Snack trayMercedes 3500 -
Mug cup holder2019 on Sprinter dash cup holder, enlarged to take a mug with a handle -
Add-on cup holderLater-model Sprinter vans -
Seat back shoe holderSprinter vans, hangs on the back of the passenger seat -
Bubble level mountSprinter 2019 and later, dash leveling bubble -
Vent mount phone adapterSprinter 2019, lets a standard air vent phone mount clip on -
Cup holderMercedes -
Wiper arm capSprinter, 72mm windscreen wiper cap -
Cup holderMercedes, cup holder -
Front door compartment clip1995 to 2006 Sprinter (T1N), re-fastens the front door pocket panel to the doorPLA, 0.2 mm layers; supports only at the base. -
Switch blankSprinter, dash switch blank -
iPhone holderMercedes -
Phone holderMercedes, dash phone holder -
Cup holderSprinter W903 (T1N), replaces the ashtray -
Cup holder adapterSprinter, fits larger cups; print in heat-resistant filament -
Seat adjusterSprinter, replacement seat adjustment part -
Modular storage boxMercedes -
Rear door storage compartmentSprinter 907, storage compartment for the rear door -
Bubble level mountSprinter W907, dashboard -
Interior light adapters and housingsVS30 Sprinter, reuses the factory LED interior lights -
ConsoleSprinter, center console -
Dual phone holderMercedes, holds two phones -
Front window bug screenSprinter van, front cab windows -
Wheel hub coverT1N Sprinter (W902 to W905) steel wheel center capPETG, 30% infill, 6 walls, supports. -
Speaker adapter ringsSprinter, adapter rings for speakers -
Vent grille reinforcementSprinter, reinforces the ventilation grille -
Switch blankT1N Sprinter -
Door panel clips2007 to 2018 Sprinter (W906), door trim panel -
Aux switch adapterVS30 Sprinter, fits the deeper factory switch panel -
HubcapSprinter T1N, replacement hubcap -
Wolfbox mirror extensionSprinter, extension arm for the Wolfbox digital mirror -
Garmin Camper 890 mountSprinter, sits in a dash cup holder -
Switch panels left and rightSprinter 907, left and right switch panels -
Backup camera display mountSprinter T1N, mounts a backup camera display -
Window cup holder offsetSprinter, makes the window cup holder slots usable -
Interior panel clipsSprinter and VW Crafter cargo area, clips for the rear wall coversPETG with max walls; PLA gets too soft in a hot van. -
Cup holder key hook and pen organizerSprinter van, sits in the cup holder -
17mm ball phone mountSprinter, phone mount with 17mm ball head -
Cup holder insert2007 to 2018 Sprinter, replaces the dash cup holder tray; fits a can in a koozie, with pen slotsPETG. Slides in above the tray and snaps down at the front. -
Cup holderSprinter, cup holder -
Instrument panel switch coverT1N Sprinter (W903) dash switch blank, with USB pass-through versions A 901 689 3139ABS-GF, 3 walls, 15% gyroid; supports recommended. Needs firm pressure to seat. -
Overhead cab shelf bracketSprinter van, front bracket for the overhead cab shelf -
Stanley cup holderMercedes -
Rear camera riserSprinter, raises the rear camera for a full-time rear view -
Hub coverSprinter T1N -
Strut ball mount spacerSprinter van, rear door strut -
Switch coverSprinter -
Overhead cab shelf rear bracketSprinter van, rear bracket for the overhead cab shelf -
Dashboard traySprinter, dashboard tray -
Phone charger mountSprinter VS30, mounts a phone charger -
Drink and can holderSprinter, drink and can holder -
Drawer with organizerMercedes, dash drawer with improved organizer -
Washer fluid reservoir cap, 72 mmSprinter, for tanks with a 72 mm inlet, print in TPU -
Universal phone holderMercedes -
Phone dockSprinter 906, phone dock for the dash -
Dash vent bladesSprinter T1N, replacement vent louvers -
Phone mount baseSprinter, base with 8 mm holes -
Front interior light LED conversionSprinter and VW Crafter, converts the front interior light to LED -
Swivel seat rail end bumper2019 on Sprinter (W907), caps the sharp ends of the seat railsTPU, 0.25 mm layers, printed at 45 degrees. Mirror on X for the other side. -
Rear camera housingSprinter van (2025) -
Wheel center capG-Class wheels -
Eyelet recessSprinter W906, recess cover for the eyelet -
Interior door lock handleOlder Puch G and Mercedes G-Class, interior door lock handle. Tested in a Puch G 300 GDPrint it and screw it to the door. -
Dash switch holder2007 to 2018 Sprinter (906) dash switch slot, holds a 16 mm round switchPETG so the clips flex. Glue the switch in; no room for the nut. -
Sun visor hinge mount2006 to 2018 Sprinter (W906), replacement sun visor hinge -
Lower door panel clip2002 to 2006 T1N Sprinter, lower door panelBlack PLA or PETG, flat side down. -
Interior screw capsSprinter, hides interior screws -
Door cable grommet clip2007 to 2018 Sprinter (W906) and VW Crafter, front door wiring boot clip A0009971151 (grommet)Open design slides over the wires without pulling them. -
Key bladeSprinter, replacement blade for the key fob -
Overhead storage shelfSprinter and VW Crafter, cab storage above the seats -
Cup holder hookMercedes -
Shifter surround frameMercedes, frame around the gear shifter -
Rear door filler cover2019 on Sprinter crew and passenger van, covers the hole behind the rear door panelPETG, dried 6 to 8 hours. Push straight in so the tabs don't snap. -
Phone holderSprinter, holds a phone or similar device -
Dash phone mount organizerSprinter (2022) -
Air vent mountSprinter, universal or phone mount -
Armrest screw cap coverMercedes 2008 and later -
Rear pillar wedge fillerSprinter, fills the gap at the rear pillar -
Upper D-pillar hole cover2019 on Sprinter, large hole in the upper rear D-pillar; version with a 12 mm cable pass-through -
Cup holder coin organizerMercedes, coin organizer that sits in the cup holder -
Door hold-open blockVS30 Sprinter, holds the doors open in light wind or on a slope -
Wolfbox rear camera mount2015 Sprinter 2500, print in ASA -
Cover buttonT1N Sprinter (W901) and VW LT2, part 9016890939 -
Cup holder pen organizerMercedes -
Trash binSprinter T1N James Cook camper, small trash bin -
Cupholder table mountSprinter, attaches a table to the front console -
Phone holder for iPhone 14 with OtterboxMercedes, holds an iPhone 14 in an Otterbox case -
Interior light LED conversionSprinter and VW Crafter, converts the interior light to LED -
Air vent connecting rodSprinter W901, repairs the dash vent -
Peltor hearing protector mountMercedes -
Center console with cup holdersMercedes vans (generation not stated), holds 30/32 oz tumblers -
Compartment with cup holderSprinter -
Radio frame adapter2002 Sprinter, extended frame for a touchscreen multimedia radio -
Heater control cable armSprinter, cab heater control cable arm -
Sun visor latchW460 G-Class, sun visor latch -
Steering column phone mountMercedes 2500 -
Two-switch panelMercedes van -
Panel retention trim ringsJayco Terrain and Entegra Launch Sprinter campers, door, wall and shower panels -
Autoterm heater intake fittingSprinter W906, intake fitting for an Autoterm 2D or 4D heater -
Right sliding door sill trimSprinter 906, sill trim for the right sliding door -
Overhead compartment holderSprinter, universal holder for the overhead storage -
Overhead DIN kit for Anytone radioSprinter VS30, overhead DIN mount for an Anytone AT-778UV -
Carling rocker switch holderVS30 Sprinter, replaces the two-switch blank -
Washer reservoir lidMercedes, windscreen washer tank -
Dash ventilation lock ringW460 G-Class, ring that locks the interior ventilation control in the dashboardCreator printed it in ABS. -
Door grommetVS30 (W907) Sprinter, between the door and body -
Curtain clipRoadtrek Sprinter camper van -
Cup holder and adapterSprinter van -
Rear door magnet bumper housing2002 to 2006 T1N Sprinter rear cargo door hold-open magnet 901 740 03 16TPU 64D or 95A. Pause the print to embed the OEM metal parts. -
165 mm speaker enclosureVS30 (W907) Sprinter, right door panel -
12V socket adapter2006 to 2018 Sprinter cup holder, swaps the lighter for a 29 mm round USB charger -
PanelPilot touchscreen adapterW907 and W910 Sprinter, mounts a PanelPilot SGD 43-A display -
Business card holder2019 Sprinter -
Rear door hole coverSprinter, plugs holes in the back doors -
Backup camera bracketSprinter, bracket for a backup camera -
Recirculation door flap repairSprinter T1N, AC recirculation flap -
Maxxair Maxxfan Plus adapterW906 Sprinter, fits the roof ribs -
Fuel cap tetherSprinter, also Dodge and Freightliner versions, tether for the fuel cap -
Cup holder with phone holderG-Class W461 1992, cup holder that also holds a phone -
Window winder retainer2001 T1N Sprinter window crank. Bridges the gap between the handle and the door card and pushes over the spline -
USB socket clipT1N Sprinter, replaces the broken clip with a round USB socket -
Lower door pocket repair washersG-Class W463, repairs the lower door pocket mounts -
Vent stopMercedes, ventilation -
Seat swap floor fillerSprinter and VW Crafter, fills the floor gap after swapping to a single passenger seat -
Portable AC roof fan adapterSprinter, connects 12V portable AC hoses to the roof fan -
Door magnet mountSprinter, weather-protected mount for the door hold-open magnet -
Volume knobSprinter, replacement volume knob -
Crew seat floor bracket fillerSprinter, fills the crew seat floor bracket -
Dash cubby replacementG500 2001, replacement dash cubby -
Map lightSprinter T1N -
Washer tank mounting grommetSprinter T1N (W903), print in TPU -
Door knobSprinter van, door knob -
Tail light mounting bracketG-Class with aftermarket tail lights, replaces cracked tail light brackets -
Overhead cupboard template2013 Sprinter conversion, router template for overhead cupboards -
Remis folding blackout blind partSprinter, part for Remis folding blackout blinds -
Parking heater adapterSprinter, adapter for a parking heater -
Phone mount with charging cableMercedes -
Trash binSprinter 907 2018, trash bin -
Starlink Mini magnetic mount adapterSprinter, magnetic mount adapter for a Starlink Mini -
EGR cooler cleaning plateSprinter with OM642, plate for cleaning the EGR cooler -
iPhone MagSafe mountSprinter, MagSafe mount for iPhone Plus and standard -
Dashboard cubby additionsMercedes, add-ons for the dash storage cubby -
Air inlet plugMercedes, plug for the air inlet -
Overhead unitsSprinter 2013, overhead storage units -
Bench clipMercedes, clip for the bench seat -
Wolfbox mirror extension adapterMercedes van, adapter for a Wolfbox mirror camera -
Half gallon slim can cup holderSprinter, cup holder for a half gallon jug or slim can -
Phone holder insertSprinter, insert for the phone holder -
Console ashtray replacementG500 2001, replaces the console ashtray -
Glove box handleT1N Sprinter (901–905) and Sprinter Classic, part 9016890058 -
Washer reservoir cap with retention ringMercedes, 72mm windshield washer reservoir cap -
ScanGauge 3 steering column mountSprinter, mounts a ScanGauge 3 on the steering column -
Cup holderSprinter, custom-fit cup holder
-
Shore power bracketMercedes van, bracket for a shore power inlet -
Yeti 14oz mug holderSprinter, holds a Yeti 14oz mug -
Entry grab handle coversSprinter, covers for the entry grab handles -
Phone charger mount for horizontal slatMercedes, phone charger mount for a horizontal vent slat -
Wolfbox front camera mountSprinter VS30 W907, mounts a Wolfbox front camera -
CapVW LT and Sprinter, replacement cap -
Rear camera grommetSprinter, grommet for the rear camera cable -
Rear diff seal installerSprinter and VW Crafter, tool for installing the rear differential seal -
ESP32 display frameSprinter, frame for a CYD ESP32 display -
Cup holder for L-trackSprinter with L-track, cup holder -
Seat bolster switch capG-Class W463, replacement cap for the seat bolster switch -
Rear light pin socketsMercedes, 5, 6 and 7 pin rear light sockets -
USB-C charger mountSprinter, USB-C charger mount -
Clutch centering toolSprinter, clutch alignment tool -
Roof vent auxiliary fan housingPuch G 230 GE Funker, adds a quiet 140 mm fan alongside the original roof vent fanUses a 140 mm IP67 fan such as Noctua NF-A14 iPPC-2000 IP67 PWM with a PWM controller. -
Dash trim pieceDodge Sprinter, dash trim piece -
RAM ball mount with heat-set insertSprinter, RAM ball mount with heat-set insert -
D-pillar coverSprinter, D-pillar cover with 4 holes -
Seat knobSprinter, replacement seat knob -
Rail coverSprinter 316 CDI Maxi, rail cover (A9066910133) -
Air intake sensor relocatorSprinter T1N 2.9, relocates the air intake sensor -
Air intake sensor dust capSprinter T1N, TPU dust cap for the air intake sensor -
Cab parking light partSprinter, cab parking lights -
Top ventilation slatSprinter W902, top vent slat -
Dash switch blankDodge and Mercedes dash switch slot, reinforced sides
-
Trim panel clipFits the trim panel holes on a 2013 Sprinter; may need scalingPETG or ABS, 20% infill, no supports.
-
Lower cup holderSprinter knee-height cup holder, 70 mm opening
-
Nalgene cup holder extension2002 to 2006 T1N Sprinter dash cup holder, takes a Nalgene or a large mugDesigned loose; shim with electrical tape.
-
Armrest pad2002 to 2006 T1N Sprinter, replaces the crumbling foam armrest padDrill the printed holes out with a 1/8 in bit; four T20 bolts.
-
Rear interior LED lightSprinter and VW Crafter, LED light for the empty hole in the rear
-
Rear upper pillar coverSprinter, fills the side holes beside the center interior light
-
Switch coverSprinter van, switch cover
-
Rear door speaker podSprinter, fits a 6x9 speaker in the rear door
-
Ashtray coverSprinter, covers the console ashtray opening
-
Flare and window trim cornerSprinter van, corner piece for trimming Flarespace flares and windows
-
Door speaker adapterSprinter, fits 6.5" speakers in the doors
-
Phone holder adapterSprinter, adapter for a universal phone holder
-
D-pillar switch panelSprinter and other vans, D-pillar switch panel plus blank
-
Headlight dust coverSprinter 2006–2018, replaces bulb cover 158 222-00
-
Cubby fillerSprinter, cubby block for a magnetic phone or tablet holder
-
Roof fan adapterVS30 Sprinter, roof adapter for a Maxxfan or 400x400 window
-
Dash hatch latch propSprinter 2021, latch extension clip for the dash hatch
-
Cup holder mount baseSprinter 2500 with the 4-cup holder, drops into the inner two
-
D-pillar socket panelSprinter and VW Crafter, D-pillar panel for 30mm 12V and USB sockets
Nothing for this model yet. Send us one.
Any make
2 partsParts that fit more than one make. Measure before you print.
-
Grille clipIsuzu, Toyota, Mazda and Mitsubishi grilles Isuzu 8942180270 · Toyota 90467-13011
-
Push-in rivet clip, 6 to 10 mmAny make. Measure the hole and the panel
Nothing for this model yet. Send us one.
Questions
Are these Mercedes parts free?
Yes. All 215 are free to download from the creator's page. 151 of them are personal or non-commercial use only, so print them for your own rig and don't sell them. The license is on every row.
How do I find the right part for my Mercedes?
Match the OEM part number where it's listed (4 of the 215 have one), or compare the old part with the preview photos and what each part fits.
What filament should I print these in?
PETG, ASA or nylon for anything in the cab or under the hood. PLA goes soft in a hot cab, so save it for a test fit. Print one, check the fit, then print the rest.
Where do the files come from?
MakerWorld, Printables, Thingiverse, Cults3D and Creality Cloud. LRDT doesn't host the files; every part links to its creator's page.
Can I add a part?
Yes. Send the link with the form at the bottom of this page. We check the fit and the license, then add it with the creator's name on it.
Send us one
Know a part we're missing?
Drew one yourself, or found one that saved your weekend? Send the link. We check the fit and the license, then add it here with the creator's name on it. FJ Cruiser trim clips, JL and Gladiator hardtop clips, 2nd-gen Trooper push clips and Patrol clips are the gaps we'd most like to fill.
Got it
We'll check the fit and the license, and if it's good it goes up with the creator's name on it.