Chevrolet clips, knobs and trim
34 free models for the Silverado, Colorado, Tahoe and Suburban, and TrailBlazer. Chevy trucks and SUVs. Most GM trim clips carry over between the Chevy and GMC twins, so check the GMC page too. The Colorado chip includes the S-10.
- Every model here is someone else's work. Download it from the creator's page, and give them a like while you're there.
- Licenses vary. Dashed tags are non-commercial or personal-use only: print them for your truck, don't sell them. A few are files attached to forum posts with no license stated; those link to the thread.
- Print in PETG, ASA or nylon. PLA goes soft in a cab in July. Check fitment against your old part before you print ten.
Most downloaded
Chevrolet
Chevrolet parts
34 parts-
Door armrest switch panel clipGMT800 Silverado, Sierra, Tahoe, Suburban and Yukon, 1999 to 2007. Front door armrest, where the switch panel clips inABS or PETG, solid, upside down with supports. Scuff and epoxy it in. -
Shift cable bushingTested on a 2012 GMC Sierra 2500. Transmission shift cable end at the shift leverSomething stronger than PLA at 100% infill. Keep a spare in the glovebox. -
Radio knob2002 Silverado 2500HD -
Rear frame hole plugsSilverado and Sierra 1500, 2014 to 2019, rear frame rail holesPETG. Scaled to 102.5% for a friction fit; print one and test before a set. -
Rear frame plugSilverado and Sierra 2500HD rear wheel well -
-
-
Rear window latch linkExtended cab Silverado and Sierra, 1999 to 2007, rear swing-out window. Fixes wind noiseASA or PETG, upright as installed with supports. Several lengths included. -
Stereo knobs1999 Suburban -
Seat back latchGMC Yukon, Chevy Suburban, Tahoe and Avalanche fold-down seat backsPETG, ABS or ASA on its side at 100% infill, no supports. Print spares. -
Rear seat armrest plugTahoe -
Door lock knob latch2007 to 2014 Avalanche, Silverado, Suburban, Tahoe, Sierra and Yukon, interior door lock knob 158446180.1 mm layers with a 0.25 mm nozzle. -
Tailgate handle rod clips2007 Chevy pickup -
Tailgate handle rod clipsChevy pickup tailgate handle, tested on a 2007. Left and right versions -
Tonneau cover clips2021 Chevy pickup factory tonneau cover -
Brake and fuel line clips1988 to 1998 GM full-size trucks, frame-mounted lines. Taken off a 1994 K2500Polycarbonate. -
Back seat clip9th-generation Suburban (1992 to 1999), rear seat 88937926 -
Door control panel clip2003–2007 Silverado -
Seat recline handle1995–2001 C/K1500 and other GM trucks -
Bedliner hole cover, extended clipsSilverado with a spray-in bedliner -
-
Hood release cable clipSquare body Chevy pickup, 1973 to 1987, hood release cableASA, in the modeled orientation with supports under the thin arm. The creator had not test-fitted it. -
Automatic shift lever capC/K1500 -
Door wiring harness clip2014 to 2018 Silverado, door harness to cabPETG, on its side for strength. -
Front grille clip1986 S-10, front grille -
A-pillar trim clip repairGMT800 GM trucks. Glues over a broken A-pillar trim clipPETG at 0.16 mm. Cut the broken clip flat first; super glue it on. -
Driver side pillar clipSilverado
-
Cup holder clip2002 Silverado 1500HD similar to 88934982
-
Tailgate lock plug2011 Silverado
-
Tailgate handle rod clips1981–1998 C/K 1500, 2500 and 3500
-
Tailgate handle clipsChevy pickup
-
Seat leverSilverado
-
Throttle cable clipS-10
Nothing for this model yet. Send us one.
Any make
2 partsClips that fit more than one make. Measure before you print.
-
Grille clipIsuzu, Toyota, Mazda and Mitsubishi grilles Isuzu 8942180270 · Toyota 90467-13011
-
Push-in rivet clip, 6 to 10 mmAny make. Measure the hole and the panel
Nothing for this model yet. Send us one.
Questions
Are these Chevrolet parts free?
Yes. All 34 are free to download from the creator's page. 16 of them are personal or non-commercial use only, so print them for your own rig and don't sell them. The license is on every row.
How do I find the right clip for my Chevrolet?
Match the OEM part number where it's listed (3 of the 34 have one), or pull the old clip and compare it with the preview photos and what each part fits.
What filament should I print trim clips in?
PETG, ASA or nylon. PLA goes soft in a hot cab, so save it for a test fit. Print one, check it against the old clip, then print the rest.
Where do the files come from?
14 from Printables, 12 from MakerWorld and 8 from Thingiverse. LRDT doesn't host the files; every part links to its creator's page.
Can I add a part?
Yes. Send the link with the form at the bottom of this page. We check the fit and the license, then add it with the creator's name on it.
Know a part we're missing?
Drew one yourself, or found one that saved your weekend? Send the link. We check the fit and the license, then add it here with the creator's name on it. FJ Cruiser trim clips, JL and Gladiator hardtop clips, 2nd-gen Trooper push clips and Patrol clips are the gaps we'd most like to fill.
We'll check the fit and the license, and if it's good it goes up with the creator's name on it.