Rivian R2 parts
23 free models made for the Rivian R2, plus 20 that fit every Rivian. Looking for another Rivian? See every Rivian part.
Before you print
- Every model here is someone else's work. Download it from the creator's page, and give them a like while you're there.
- Licenses vary. Dashed tags are non-commercial or personal-use only: print them for your truck, don't sell them. A few are files attached to forum posts with no license stated; those link to the thread.
- Print in PETG, ASA or nylon. PLA goes soft in a cab in July. Check fitment against your old part before you print ten.
Rivian R2 parts
23 parts-
Rear cubby charging adapter holderR2, holds the J1772 and CCS1 adapters in the rear driver side cubby -
Center console insertR2, organizer tray for the armrest console, held in with four 6 x 2 mm magnets -
Customizable console organizerR2 center console -
Hitch receiver storage boxR1T, R1S and R2, hides small tools under the OEM hitch cover -
Hitch cover screw removerR2, removes the trailer hitch cover screw without a screwdriver -
Front plate tow hook holderR2, mounts the front plate holder on the tow hook point -
Gear Guard SSD clipR2, holds a SanDisk Extreme SSD for Gear Guard out of sight in the glove box -
SSD enclosure clipR2 glove box, tucks a 2.5 in SSD enclosure in place for Gear Guard recording -
Lockable hitch storage boxR1T and R1S, lockable box that rides in the receiver hitch -
Large seat back hookR2, one-piece seat back hook for bigger bags -
DCFC and J1772 adapter holderR2, holds a CCS1 and J1772 to NACS adapter in the driver side cubby -
Hatch pocket coverR2, covers the pockets on either side of the hatch -
-
Cargo sub-floor tie downR2, clip-on tie down for the cargo sub-floor; light loads only -
Cargo floor pull handleR2, paracord loop clip to lift the folded cargo floor from the backPrinted in PETG. -
Overhead glasses holderR2, holds glasses against the headliner -
Adjustable console dividerR2, splits the deep center console into four bins -
Seat back coat hookR2, hook for the back of the front seats -
Driver side vent louversR2, manual louvers for the driver side air vent -
Lectron adapter trayR2, center console drawer insert that cradles a Lectron CCS1 to NACS adapter -
Console organizer trayR2, drop-in tray for the deep center console -
Console phone holderR2 center console, takes a 17 mm ball mount -
Cargo net tie-downR2, lets an Audi cargo net clip into the cargo area
Fits every Rivian
20 partsParts made for Rivian trucks in general. Check the fit on yours before you print.
-
Tablet mountRivian, iPad mount -
Snug fit hookRivian accessory hook -
Floor water bottle holderRivian, sits on the floor -
Lower console trash canRivian with a BestEVMod Gen 2 lower console -
Center console organizerRivian, center console -
Portable charger wall mountRivian portable charger, holds it on the wall under the outlet to take the strain off the plug -
CarPlay/Android Auto screen mountRivian, mounts an aftermarket CarPlay/Android Auto unit -
Back seat tablet hangerRivian, holds an iPad for rear passengers -
Hydro Flask cup holder insertRivian, cup holder insert for a Hydro Flask -
CarPlay mountRivian, mounts a CarPlay screen -
Hitch cover thumb screwRivian, thumb screw for the hitch cover -
MagSafe charging plate and bracketRivian, mounts a MagSafe charger -
Sun shade retaining clipRivian, holds the Electruck 4x4 panoramic sun shade -
Rail adapterRivian, adapter for the cargo rails -
Crossbar spacersRivian, spacers for Yakima FatCat ski racks on the crossbars -
Headrest pinRivian, headrest pin -
License plate holderRivian, plate holder -
Center console organizerRivian, center console insert -
Console storage add-onRivian, extra console storage -
EVPLAY button and mic mountRivian, mounts an EVPLAY button and microphone
Any make
2 partsParts that fit more than one make. Measure before you print.
-
Grille clipIsuzu, Toyota, Mazda and Mitsubishi grilles Isuzu 8942180270 · Toyota 90467-13011 -
Push-in rivet clip, 6 to 10 mmAny make. Measure the hole and the panel
Nothing for this model yet. Send us one.
Questions
Are these Rivian R2 parts free?
Yes. All 43 are free to download from the creator's page. 30 of them are personal or non-commercial use only, so print them for your own rig and don't sell them. The license is on every row.
How do I find the right part for my Rivian R2?
Check the years and trim in what each part fits, match the OEM part number where it's listed (0 of the 43 have one), or compare the old part with the preview photos.
What filament should I print these in?
PETG, ASA or nylon for anything in the cab or under the hood. PLA goes soft in a hot cab, so save it for a test fit. Print one, check the fit, then print the rest.
Where do the files come from?
Thingiverse, Printables, MakerWorld, Cults3D, Thangs, Creality Cloud, MyMiniFactory and owner forums. LRDT doesn't host the files; every part links to its creator's page.
Know a part we're missing?
Drew one yourself, or found one that saved your weekend? Send the link. We check the fit and the license, then add it here with the creator's name on it. FJ Cruiser trim clips, JL and Gladiator hardtop clips, 2nd-gen Trooper push clips and Patrol clips are the gaps we'd most like to fill.
We'll check the fit and the license, and if it's good it goes up with the creator's name on it.