Free Parts / Ford / Transit
Ford Transit parts
197 free models made for the Ford Transit, plus 13 that fit every Ford. Looking for another Ford? See every Ford part.
Add a part
Before you print
- Every model here is someone else's work. Download it from the creator's page, and give them a like while you're there.
- Licenses vary. Dashed tags are non-commercial or personal-use only: print them for your truck, don't sell them. A few are files attached to forum posts with no license stated; those link to the thread.
- Print in PETG, ASA or nylon. PLA goes soft in a cab in July. Check fitment against your old part before you print ten.
Ford Transit parts
197 parts-
Coffee cup holder phone mountTransit, phone holder for 76 to 83 mm wide phones that sits in the 73 mm coffee cup holder -
Dash slot phone holderTransit, phone holder that drops into the V-slot on the dash -
Cup holderTransit Mk7 2006–2014, replacement cup holder -
Window vent grilleTransit 2014 and later, two-part window vent grille that works with wind deflectors -
-
Dash phone holderTransit 2015 and later, phone holder for the gap between the speedometer and the air vent -
-
-
Phone mount base and ballTransit 2020 and later, mount block that slides in behind the radio with a ball post (made for a 2021 Transit 250) -
Mirror dashcam plateTransit 2015 and later, replaces the rearview mirror with a holder for a dashcam mirror screen -
Can cupholderTransit Mk7 2006–2014, adapter that keeps 250 ml cans from falling over -
Seat lift handleTransit, clip-on seat height adjustment handle -
Can holder adapterTransit Mk7 2006–2014, cup holder adapter for 250 and 500 ml cans -
Wheel capTransit Mk6 2000–2006, wheel center cap with Ford logoPrint in PETG; ABS or ASA is better -
Trash bag hooksTransit 2020 and later, hooks that lock onto the cup holder lip to hang trash bags -
Can holderTransit Mk7 2006–2014, can holder for the dash -
USB port fasciaTransit Mk7 2006–2014, dash fascia that brings out the rear USB port of a double DIN head unit -
Seat mount coverTransit 2015 and later, push-in cover for exposed seat bracket openings -
-
Cup and phone holderTransit, slide-in cup and phone holder that fits cans, bottles and travel mugs -
Remis blind jointTransit, joint for Remis cab blinds (mirror it for the left side)Print in ABS on a textured PEI plate -
Headlight bulb socketTransit Mk7 2006–2014, replacement H4 or H7 headlight bulb wiring socket -
Roof rail holderTransit Mk5 to Mk7, holder for the factory rail for tarps, clotheslines and nets -
Step screw plugsTransit 2015 and later, replacement screw plugs for when the slider step is removed -
Drawer cutlery insertTransit Nugget 2006–2013, cutlery organizer insert for the kitchen drawer -
Wheel nut capTransit, protective cap for the 21 mm wheel nuts -
Key fob sleeveTransit 2015–2020, snap-on key fob sleeve that restores the key ring loop and locks the blade open -
Can holder adapterTransit, cup holder adapter that keeps small cans from tipping -
Dashcam holderTransit 2015 and later, slide-on dashcam holder for the dash top tray -
Dash organizer drawersTransit, organizer drawers for the factory dash compartments -
iPad Pro mountTransit 2020 and later, iPad Pro 12.9 mount that bolts in behind the radio -
Wheel nut capTransit, wheel nut cap -
Replacement cupholderTransit, replacement for a lost or broken factory cupholderPETG with tree supports -
Wall harness clipTransit, wire harness clip for the square holes in the walls -
Rain gutter mountTransit, non-destructive rain gutter anchor for solar panels or lights with M5 hardware -
Ceiling wiring loom clipTransit, snaps into the ceiling frame holes to replace broken factory harness clips -
Power inlet adapter plateTransit 2015 and later, mounts a NOCO 120V shore power inlet on the rear underside -
Center console phone mountTransit 2020 and later, phone mount for the large center console -
Steering wheel pocket phone holderTransit, phone holder for the pocket next to the steering wheel -
-
Cup holder phone holderTransit, phone holder that fits over the cup holder rim, with a nut to lock itUse supports for the cradle and a brim on the cup part -
Extra switch bracketsTransit Mk7 2006–2013, brackets for mounting additional switches -
Fastening clipTransit Mk3 1986–1991, two-part snap-fit body clip with pin -
Wire channel clipTransit 2015 and later, clip for running wires along the body channels -
Conduit clipsTransit, 20 mm cable and conduit clips that snap onto the 2 mm body steel -
Phone holder bracketTransit, bracket for a universal ball-mount phone holder -
Shore power D-pillar plateTransit 2015 and later, snap-in D-pillar cover plate that adds a shore power inlet -
AC vent clipTransit, clip that holds the dash AC vents open -
D-pillar capsTransit Mk8 2014 and later, caps for the D-pillar holes -
Rear camera tilt mountTransit 2020 and later, rearview mirror camera mount angled up and inward for a better highway view -
Cowl screw capTransit Mk6 2000–2006, replacement windscreen cowl screw cap -
Headlight housing repairTransit, repair piece for a broken headlight housing -
Coffee cup holderTransit Mk6 2000–2006, coffee cup holder -
MagSafe cupholder chargerTransit, MagSafe charging stand that sits in the cupholder (made for iPhone 17) -
Rear door hole plugsTransit 2015 and later, plugs for the holes in the rear doors (made on a 2023 high roof) -
Rear heater control knobTransit minibus, control for switching warm or cold air to the rear -
Door speaker mountTransit 2014 and later, door speaker mount with a rain shield -
Seat anchor cover plugTransit 2025, plug for the floor seat anchor holes -
Dashcam dash mountTransit 2015 and later, clip-on dash mount for the Vantrue E1 dashcam (made for a 2022 van) -
Phone mount baseTransit, dash base adapted to take an existing phone mount -
USB and mic fasciaTransit, dash fascia for the head unit USB port and Bluetooth mic -
Vent phone holderTransit, phone holder for the dash vent with a charging cutout -
Antenna base ringTransit, adapter ring for a stubby antenna on the factory basePrint in PETG or another UV-resistant material -
Roof vent adapterTransit 2015 and later, flat adapter for a standard 14 in RV roof vent -
Overhead shelf supportTransit Mk8 2014 and later, support bracket for the cab overhead shelf -
Snug can holderTransit, snug-fit can holder -
Cupholder ball mountTransit Mk7 2010, cupholder for the dash fold-out shelf with a 17 mm ballPrint in PETG -
Seat adjustment leverTransit 2012, replacement seat adjustment lever -
MagSafe iPhone holderTransit 2021 and later, clip-in MagSafe holder sized for an iPhone 16 Pro Max in a case -
Roof backup camera housingTransit Mk6 2009 L2H2, roof-mount backup camera housingPrint in ABS, PETG or PETG-CF -
Rear bumper cornerTransit Mk2 1978–1986, rear right bumper corner -
Radiator actuator gearTransit Mk7 2008, replacement AC actuator gear -
Windscreen cap coverTransit Mk6 2000–2006, windscreen cowl cap coverPrint in PETG; ABS or ASA is better -
Cup holder pen organizerTransit, organizer for pens and small tools that fits the center and side cupholders -
Rear light screw toolTransit Mk7 2006–2014, helper tool for opening the rear light screws -
Radio mount device bracketTransit 2020 and later, device mount that bolts to the stock radio mounting points (made for a 2024 mid roof) -
-
Grille hole plugTransit 2015 and later, snap-in plug for the hole in the aftermarket Raptor-style grille -
Seat adjustment leverTransit, replacement seat adjustment lever -
Sun visor mountTransit, replacement sun visor mounting partPrint in PETG with 5 mm threaded inserts -
Rear heater switchTransit 2011 and earlier, switch for the rear heater panel modes -
Key housingTransit Mk2 1978–1986, replacement key housing -
Headlight adjusterTransit Mk3 1986–1991, replacement headlight adjuster -
-
B-pillar grab handleTransit 2015 and later, B-pillar grab handle on the factory threaded holesPETG, 5 walls, 50% infill, two M6 cap screws -
Organizer cupTransit 2016, cupholder organizer for coins, keys and tickets -
Fan ventilation grilleTransit Mk7 2006–2014, ventilation housing for 120 mm fans with insect meshPrint in ASA; pause to insert M4 nuts -
Radio surround frameTransit, frame above the car radio -
Headlight rain capTransit Mk7 2006–2014, rain cap for the headlight back -
Nalgene cupholder adapterTransit 2015 and later, cupholder adapter for a Nalgene bottle -
Trim clipTransit Mk4 1994–2000, small interior trim clip -
-
Washer fluid capTransit Mk7 2006–2014, washer fluid cap (shared with Focus and Fiesta) -
Headlight mounting clipsTransit Mk3 1986–1991, reinforced headlight mounting clips -
Dash button coverTransit Mk4 1994–2000, dashboard button cover -
Rear door latch coverTransit, cover for the upper latch of the rear cargo doors -
-
Dashboard clipsTransit Mk2 1978–1986, dashboard clips -
Rear column ventsTransit 2015 and later, parts that turn the rear pillars into air vents -
Unistrut roof rack fittingsTransit 2015 and later, feet, angled adapters and spacers for a Unistrut rear roof rack (148 in mid roof) -
-
Dash light coversTransit Mk3 1986–1991, replacement dashboard light covers that restore the green glowPrint in PETG -
Door sill anchorsTransit 2015 and later, sliding door sill anchors for a raised floor with the Heavy Duty floor -
Bluetooth speaker dash holderTransit Mk2 1985, dash holder sized for a Bose SoundLink Revolve+ II -
FITS cup holderTransit, cup holder for vans with the FITS tray system -
Upfitter switch guardTransit 2020–2022, replacement upfitter switch mount with a guard against accidental presses -
Cupholder key and bag insertTransit 2015 and later, cupholder insert with a key cup and a bag hook (made for a 2023 cargo) -
Roof cable entry coverTransit 2015 and later, cable entry cover over the front roof rubber plug with a cord grip -
Remote key holderTransit Mk6 2000–2005, holder for the remote when the key ring loop breaks -
Solar cable entry glandTransit, solar cable entry gland that uses the existing roof holes -
Backup camera mountTransit, roof-mounted reverse camera mount -
Head unit mount adapterTransit 2020 and later, positioning adapter for a DUDU7 13 in head unit -
No-rattle can holderTransit Mk7 2006–2014, drop-in insert for 330 and 500 ml cans with slim can adapter -
-
Curtain bar holderTransit, wall-mounted curtain bar holders -
Dashcam mirror bracket plateTransit 2015 and later, flat plate for a Viofo A329 on the rearview mirror bracket -
Handrail mountTransit minibus, fastening for the K-002 handrail -
Replacement handleTransit, replacement grab handle -
-
Roof vent adapter 14 x 14Transit 2015 and later, adapts 14 x 14 in RV roof vents to the curved roof -
Fuel filler neck housingTransit, fuel filler neck housing -
-
Cowl drain filterTransit Mk8 2014 and later, snap-on filters for the windshield cowl drains (LHD only) -
Hub dust coverTransit Mk7 2006–2014, front and rear hub dust cover -
Overhead console insertTransit 2015 and later, overhead console insert that moves the light button aside to fit another switch -
Rear door grommetTransit, grommet for the rectangular holes in the rear doors -
Body hole coverTransit Mk7 2006–2014, hole cover for camper conversions -
Radio cage with fasciaTransit Mk8 2014 and later, cage and fascia for a single DIN Kenwood radioNeeds M5 heat-set inserts -
Dash compartment hingeTransit Mk7 2006–2014, replacement hinge for the dash storage compartmentPrint on its side in PETG -
Sun visor holderTransit Mk1 1967, sun visor holder copied from the original -
Rear door handlesTransit Mk8 2014 and later, interior rear door handles for the wiper motor holesFour M6 x 20 socket head screws -
Ashtray pocket boxTransit Mk6 2000–2006, storage box for the ashtray slot with a 5 mm button cutoutPrint in PETG -
Aux input bezelTransit 2015–2019, aux input bezel for the slim console, replaces a no-longer-available Ford part -
Rear window blind frameTransit, frame that fits a honeycomb pleated blind into the rear door windows -
Seat hole coverTransit 150 2018, cover for the floor seat holes -
Interior air intake coversTransit 1997, left and right interior air intake covers -
Rear door spacerTransit, rear door spacer -
Roof AC adapter 9.25 x 14Transit 2015 and later, roof adapter for OutEquip Pro 12V rooftop AC units -
Floor pan plugTransit, 120 x 80 mm replacement floor pan plug -
Spare wheel hoist adapterTransit 2015 and later, adapter to hang a Method 701 wheel on the OEM spare tire hoist -
Rear door latch coverTransit, rear door latch cover -
Floor sill retainer pinsTransit 2015 and later, replacement Christmas tree pins for the Heavy Duty floor sill -
-
Cargo lamp housingTransit, housing to relocate the cargo area lamp when fitting airline track -
Roof window frameTransit 2014 H2L2, mounting frame for a 96 x 65.5 cm roof window -
Dual socket upgradeTransit Mk7 2006–2014, adapter that adds a USB charger beside the lighter socket -
Trim strip clipTransit Mk6 and Mk7, trim strip clip 4069907 -
Seat release latchTransit wagon 2016–2018, seat hook latch for removing the seats -
Seat mount leg protectorTransit 2015 and later, cover for the sharp seat mount channel edge -
Gauge vent coverTransit Mk6 2001–2007, dash vent replacement for custom gauges -
iPad holderTransit 2016 RHD, iPad Air holder that clips onto the coin holder -
Rear door check strap buttonTransit Mk7 2006–2012, release button for the rear barn door check straps -
Sliding door lock extenderTransit 2015 and later, extends the sliding door manual lock through a conversion wall panel -
Wheel capTransit Mk2 1984, wheel cap -
Fan coupling replacementTransit Mk2 1984, non-viscous replacement for a broken fan viscous coupling -
Door speaker adapterTransit Mk7 2009–2010, adapter for 6 to 6.5 in door speakers in the 5 x 7 openings -
Mirror capTransit Mk2 1978–1986, mirror cap -
Footwell speaker adapterTransit Mk3 1986–1991, left footwell speaker adapter plate -
Sliding door alignment guideTransit Mk7 2006–2014, sliding door leading edge alignment part -
Fuel cap latchTransit, inner latch for the fuel cap -
Sliding door opener coverTransit Mk7 2006–2013, sliding door opener cover -
Cargo roof grab handleTransit cargo van, grab handle that pops into the cargo area roof -
Rear window screw insertsTransit, slide-in inserts that add screw points around the rear windows -
Crank seal toolTransit Mk7 2.2 and 2.4, crank seal removal and install tool -
Front rim coverTransit Mk2 1978–1986, front steel rim cover -
Curtain rod holderTransit Mk7 2006–2014, curtain rod holder that replaces the factory hooks -
Sun visor hingeTransit Mk7 2006–2014, replacement sun visor hinge -
Sliding door rail end capTransit Mk7 2006–2014, replacement sliding door rail end cap -
Rear light wingnutTransit Mk7 2006–2014, M6 wingnut for the rear light cluster -
Roof vent infillTransit Mk7 2006–2014 LWB high roof, infill for the gaps when fitting a roof vent -
Rear speaker bracketTransit Mk7 2006–2014, angled rear speaker bracket -
Seat mount coversTransit Mk8 2014 and later, covers for the open mounts after removing the second row seats -
Floor seat lock cover plateTransit 2015 and later, plates covering the floor seat holes -
Front bumper capTransit Mk3 1986–1991, cap that hides the front bumper screws -
Gutter tarp holderTransit Mk6 2002, two-part rain gutter bracket for a tarp or awning -
Radio mic holderTransit Mk7 2009–2013, Yaesu FTM-300 mic holder at the dash bin -
Side door knobTransit Mk5 bus and Mk6, side door knob -
Wheel center capTransit 2020, front wheel center cap -
Headrest hookTransit Mk6 and Mk7, hook system for the headrest posts -
Double DIN radio bezelTransit Mk6 2000–2006, double DIN radio bezel -
D-pillar coversTransit Mk8 2014 and later, rear D-pillar covers -
Bonnet stay clipTransit Mk3 to Mk5, bonnet stay rod clip -
Cup holderTransit Mk5, cup holder -
Fuel door hinge fixTransit 150 2015 and later, fuel door hinge repair -
Bike phone holder adapterTransit 2015 and later, adapts a spring-loaded bike phone holder to the dash -
Fuel filler capTransit Mk6 2000–2006, fuel filler cap with an O-ring groove -
Cowl screw capTransit 2000–2006, windscreen cowl screw cap 4457466 -
Seat latch coversTransit 2016, seat latch covers -
Maxxair switch mountTransit 2019 passenger van, mounts the Maxxair 6-button switch to a Maxxair 7500K fan -
Fuse box cover holderTransit Mk3 1986–1992, fuse box cover holder -
B-pillar grab handleTransit 2025 mid roof, B-pillar grab handle -
Cubby phone holder baseTransit 2025, phone holder base that clips to the cubby under the center screen -
Flywheel locking toolTransit Mk7 2006–2014, flywheel locking tool -
BCM coverTransit Mk8 2014 and later, keeps windscreen condensation off the BCM -
Fuel filter housing toolTransit Mk7 and Mk8, fuel filter housing tool -
EcoFlow window adapterTransit Mk6 and Mk7, connects EcoFlow Wave 3 hoses through the sliding window -
Floor hole plugsTransit 2015 and later, OEM-style floor hole plugs made from 3D scans
Fits every Ford
13 partsParts made for Ford trucks in general. Check the fit on yours before you print.
-
Angled oil fill funnelFord Coyote 5.0 V8, angled funnel for the oil fill -
Key fob shellFord 3-button key fob, replacement shell -
Capless fuel funnelFord vehicles with capless fuel fillers, funnel for refueling from a can -
Key fob shellFord key fob, replacement shell -
Floor mat retaining clipsFord carpet mats (made for a Transit Custom) -
Seat adjustment handleFord seat recline handle -
Door and tailgate latch rod clipFord trucks and other Ford/GM vehicles, retainer clip on door and tailgate latch rods F65Z-1521952-AA, F7DZ-7421952-AACreator switched to PC Blend for strength; PLA only for test fits. -
Door cup holderModern Ford trucks, door pocket cup holder -
-
Snorkel grilleFord vehicles with a Safari Armax snorkel -
-
Blend door actuator bitFord; driver bit for the HVAC blend door actuator -
Door lock knobFord F-150 and many Ford trucks 1991-2014 (creator's estimate), interior door lock post knob FODZ-5421850-APrinted in PETG for heat; ASA, PA or ABS also suggested. 0.08mm layers, 3 walls, 100% infill.
Any make
2 partsParts that fit more than one make. Measure before you print.
-
Grille clipIsuzu, Toyota, Mazda and Mitsubishi grilles Isuzu 8942180270 · Toyota 90467-13011 -
Push-in rivet clip, 6 to 10 mmAny make. Measure the hole and the panel
Nothing for this model yet. Send us one.
Questions
Are these Ford Transit parts free?
Yes. All 210 are free to download from the creator's page. 124 of them are personal or non-commercial use only, so print them for your own rig and don't sell them. The license is on every row.
How do I find the right part for my Ford Transit?
Check the years and trim in what each part fits, match the OEM part number where it's listed (5 of the 210 have one), or compare the old part with the preview photos.
What filament should I print these in?
PETG, ASA or nylon for anything in the cab or under the hood. PLA goes soft in a hot cab, so save it for a test fit. Print one, check the fit, then print the rest.
Where do the files come from?
Thingiverse, Printables, MakerWorld, Cults3D, Thangs, Creality Cloud, MyMiniFactory and owner forums. LRDT doesn't host the files; every part links to its creator's page.
Send us one
Know a part we're missing?
Drew one yourself, or found one that saved your weekend? Send the link. We check the fit and the license, then add it here with the creator's name on it. FJ Cruiser trim clips, JL and Gladiator hardtop clips, 2nd-gen Trooper push clips and Patrol clips are the gaps we'd most like to fill.
Got it
We'll check the fit and the license, and if it's good it goes up with the creator's name on it.