Jeep Willys Wagon 4WD
1949–64
Also called Willys Jeep Station Wagon or Utility Wagon
The Jeep Willys Wagon 4WD (1949–64) left the factory on 28 in tall tires, with a 104.5 in wheelbase and 37°, 18° and 20° approach, breakover and departure angles. Every number is from the maker's own figures unless the calculators say otherwise. A few figures here are still waiting on a factory document; the calculators mark them.
Angles37 · 18 · 20°Approach, breakover, departure
Clearance8.5 inFactory figure
Where it ranks, stock
Best trim, against every stock 4x4 with that figure · Rank your buildSize
- Wheelbase
- 104.5 in
- Front overhang
- 30.9 in
- Rear overhang
- 40.9 in
- Body
- SUV
- Stock tires
- 28.0
Transmissions and low range
- 3-speed manual (Borg-Warner T-90A)
- 2.798 · 1.551 · 1
- 3-speed manual (Borg-Warner T-90C), 1963 on
- 3.339 · 1.851 · 1
- Low range, d18
- 2.46:1
Axles
- Front
- Dana/Spicer 25 (27 from 1961)
- Rear
- Dana/Spicer 44
Suspension
- Front
- solid axle on leaf springs
- Rear
- leaf springs, solid axle
- Rear layout
- Leaf springs
- Front wheel travel
- Not published. Know it? Send it in
- Rear wheel travel
- Not published. Know it? Send it in
- Flex (ramp score), stock
- Not published. Know it? Send it in
- Work out yours
- Wheel travel and flex with your parts
Every calculator, set up for the Willys Wagon 4WD
Tire sizeBigger tires: speedo, clearance, angles and brakes.Compare tiresRegearHighway RPM on every ratio and mpg.Pick your gearsCrawl ratioHow slow it crawls, against other rigs.Work out crawlSpeedometerWhat it really reads on new tires.Fix your speedoLinksAnti-squat and what a lift does to it.Check your linksClearanceReal angles from a tape, and the bumpers that fit.Measure your anglesBuild sheetEvery part and number on your rig, on one sheet.Start a build sheetLeaderboardsWhere the Willys Wagon 4WD ranks against every stock rig.See where it ranks
Source: . How we source and check figures.
Use at your own risk. These numbers are estimates from factory figures, to help you plan. Check them against your rig and a qualified shop before you buy, cut, lift or drive on it; we're not liable for what you do with them. Full terms.