Jeep Willys Pickup 4WD
1947–65
Also called Willys Jeep Truck
The Jeep Willys Pickup 4WD (1947–65) left the factory on 29.4 in tall tires and 4.88 or 5.38 axle gears depending on trim, with a 118 in wheelbase. Every number is from the maker's own figures unless the calculators say otherwise. A few figures here are still waiting on a factory document; the calculators mark them.
Where it ranks, stock
Best trim, against every stock 4x4 with that figure · Rank your buildTrims
2 we have figures for| Trim | Tire | Transmission | Axle | Angles | Clearance | Use in the calculators |
|---|---|---|---|---|---|---|
| Four-cylinder (L-134 / F-134), T-90, 6.50-16 | 29.4 | 3-speed manual, 3-speed manual | 5.38 | — · ~19.2 · — | 7.8 in* | Use → |
| 6-226 Super Hurricane six (1954-62), 6.50-16 | 29.4 | 3-speed manual, 3-speed manual | 4.88 | — · ~19.2 · — | 7.8 in | Use → |
* The maker doesn’t publish this figure for that trim, so it shows the closest trim’s (same tire where we have one), or a close relative’s that shares the same body or front end. Hover the star to see which.
~ Estimated from the wheelbase and ground clearance. No maker has published it for this rig yet.
Size
- Wheelbase
- 118 in
- Front overhang
- 28.3 in
- Rear overhang
- 37.5 in
- Height
- 67 in
- Body
- Pickup
- Stock tires
- 29.4
Transmissions and low range
- 3-speed manual (Borg-Warner T-90A)
- 2.798 · 1.551 · 1
- 3-speed manual (Borg-Warner T-90C), 1963 on
- 3.339 · 1.851 · 1
- Low range, d18
- 2.46:1
Axles
- Front
- Dana/Spicer 25 (25/27 from 1961)
- Rear
- Timken 51540 (early), Dana 44/53; Dana 53 from 1954
- 4.88 ratio
- 6-226 Super Hurricane six (1954-62), 6.50-16
- 5.38 ratio
- Four-cylinder (L-134 / F-134), T-90, 6.50-16
- Ratios made for it
- 4.88 · 5.38 · 6.17
Suspension
- Front
- solid axle on leaf springs
- Rear
- leaf springs, solid axle
- Rear layout
- Leaf springs
- Front wheel travel
- Not published. Know it? Send it in
- Rear wheel travel
- Not published. Know it? Send it in
- Flex (ramp score), stock
- Not published. Know it? Send it in
- Work out yours
- Wheel travel and flex with your parts
Every calculator, set up for the Willys Pickup 4WD
Source: . How we source and check figures.
Use at your own risk. These numbers are estimates from factory figures, to help you plan. Check them against your rig and a qualified shop before you buy, cut, lift or drive on it; we're not liable for what you do with them. Full terms.