Mitsubishi Montero
Gen 1 2-door, 1983–91
Factory gearing, tires, angles and brakes for the Montero, and what the usual upgrades do to it. Every number is from the maker's own figures unless the calculators say otherwise. A few figures here are still waiting on a factory document; the calculators mark them.
Size
- Wheelbase
- 92.5 in
- Front overhang
- 27 in
- Rear overhang
- 35.4 in
- Height
- 74 in
- Body
- Short wheelbase SUV
- Stock tires
- 205/80R16, 31x10.50R15
Transmissions and low range
- Low range, tc1944
- 1.944:1
- Low range, tc1925
- 1.925:1
Axles
- Front
- Mitsubishi IFS, 7.25 in diff (4-cyl) / 8 in low-pinion (V6)
- Rear
- Mitsubishi solid, 8 in (4-cyl) / 9 in (V6)
- 4.625 ratio
- JDM L144GW metal top 2.5 TD, 5MT
- 4.875 ratio
- JDM L141GW wide 3.0 V6, 5MT
- Ratios made for it
- 4.875 · 5.29
Brakes
- Front rotor
- 10.91 in, 277 mm
- Rear drum
- 10.00 in, 254 mm
- Rear
- drum
Suspension
- Front
- double wishbone IFS, torsion bars
- Rear
- leaf springs, solid axle
- Rear layout
- Leaf springs
Fuel economy
- EPA highway, automatic
- 16 mpg
- EPA highway, manual
- 18 mpg
- Rated years
- 1984–1991, 4WD
Aftermarket bumpers
1 listedMakers almost never publish angles, bottom heights or how far a bumper tucks, so these fill in as owners measure them. Measured yours? Add it on the rig page and every owner of this Montero sees how it does on their tires and lift.
Front 1
Rear
None listed yet.
Every calculator, set up for the Montero
Source: car.motor-fan.jp. Aftermarket 2.85:1 low-range gears fit Gen 1 2.6 and 3.0 transfer cases.
Use at your own risk. These calculators are here to help you plan and to inform your decisions, not to sign off on a build. Many numbers are estimates worked out from factory figures, and some factory figures are not yet confirmed. Check every number against your own truck, its manuals and a qualified shop before you buy parts, cut, weld, lift, regear or drive on it. Long Range Desert Tools is not liable for anything you do based on these calculators or their results. The full terms are in our policies.