Mitsubishi Montero
Gen 1 4-door, 1989–91

Factory gearing, tires, angles and brakes for the Montero, and what the usual upgrades do to it. Every number is from the maker's own figures unless the calculators say otherwise. A few figures here are still waiting on a factory document; the calculators mark them.

Use this truck in the calculators
106.1 in wheelbase · 29.3 in front · 45.9 in rear overhang
in
Axle ratio4.875Factory
Angles38 · 18 · 28°Approach, breakover, departure
Clearance8.5 in8.1 to 8.5 in by trim
Highway mpg17EPA

Trims

2 we have figures for
TrimTireTransmissionAxleAnglesClearanceOpen
JDM L149GW mid-roof 2.5 TD, 5MT205/80R164.87538* · 18* · 28*8.1 inUse →
JDM L146GW wide 3.0 V6, 4AT265/70R154.87538 · 18 · 288.5 inUse →

* The maker doesn’t publish this figure for that trim, so it shows the closest trim’s (same tire where we have one), or a close relative’s that shares the same body or front end. Hover the star to see which.

Size

Wheelbase
106.1 in
Front overhang
29.3 in
Rear overhang
45.9 in
Height
74 in
Body
SUV
Stock tires
205/80R16, 265/70R15

Transmissions and low range

Low range, tc1944
1.944:1
Low range, tc1925
1.925:1

Axles

Front
Mitsubishi IFS, 7.25 in (4-cyl) / 8 in low-pinion (V6)
Rear
Mitsubishi solid, 8 in (4-cyl) / 9 in (V6)
4.875 ratio
All trims
Ratios made for it
4.875 · 5.29

Brakes

Front rotor
10.91 in, 277 mm
Rear drum
10.00 in, 254 mm
Rear
drum

Suspension

Front
double wishbone IFS, torsion bars
Rear
3-link with coil springs (LWB got coils; SWB kept leaves)
Rear layout
Factory 3-link

Fuel economy

EPA highway, automatic
17 mpg
EPA highway, manual
17 mpg
Rated years
1989–1991, 4WD

Aftermarket bumpers

1 listed

Makers almost never publish angles, bottom heights or how far a bumper tucks, so these fill in as owners measure them. Measured yours? Add it on the rig page and every owner of this Montero sees how it does on their tires and lift.

Rear

None listed yet.