Land Rover Series I 80
1948–53
Also called Series 1 80
The Land Rover Series I 80 (1948–53) left the factory on 28.3 in tall tires and 4.70 axle gears, with an 80 in wheelbase and 47°, 23° and 23° approach, breakover and departure angles. Every number is from the maker's own figures unless the calculators say otherwise. A few figures here are still waiting on a factory document; the calculators mark them.
Axle ratio4.7Factory
Crawl ratio13.6:1First × low × axle
Angles47 · 23 · 23°Approach, breakover, departure
Clearance8 inFactory figure
Where it ranks, stock
Best trim, against every stock 4x4 with that figure · Rank your buildSize
- Wheelbase
- 80 in
- Front overhang
- 22.3 in
- Rear overhang
- 29.6 in
- Height
- 77 in
- Body
- Short wheelbase SUV
- Stock tires
- 28.3
Transmissions and low range
- 4-speed manual (Rover main gearbox)
- 1 · 1.49 · 2.043 · 2.996
- Low range, rover two-speed transfer box
- 2.888:1
Axles
- Front
- Rover spiral bevel, enclosed joints
- Rear
- Rover spiral bevel
- 4.7 ratio
- All trims
- Ratios made for it
- 4.7
Suspension
- Front
- solid axle on leaf springs
- Rear
- leaf springs, solid axle
- Rear layout
- Leaf springs
- Front wheel travel
- Not published. Know it? Send it in
- Rear wheel travel
- Not published. Know it? Send it in
- Flex (ramp score), stock
- Not published. Know it? Send it in
- Work out yours
- Wheel travel and flex with your parts
Roof and stability
- Roof load limit
- No roof load limit published.
- Roof
- Removable top
- Track
- 50 in front, 50 in rear
- Curb weight
- 2,610 lb unconfirmed
- Rack and tent
- Roof rack and tent calculator
Every calculator, set up for the Series I 80
Tire sizeBigger tires: speedo, clearance, angles and brakes.Compare tiresRegearHighway RPM on every ratio and mpg.Pick your gearsCrawl ratioHow slow it crawls, against other rigs.Work out crawlSpeedometerWhat it really reads on new tires.Fix your speedoLinksAnti-squat and what a lift does to it.Check your linksClearanceReal angles from a tape, and the bumpers that fit.Measure your anglesBuild sheetEvery part and number on your rig, on one sheet.Start a build sheetLeaderboardsWhere the Series I 80 ranks against every stock rig.See where it ranks
Source: . How we source and check figures.
Use at your own risk. These numbers are estimates from factory figures, to help you plan. Check them against your rig and a qualified shop before you buy, cut, lift or drive on it; we're not liable for what you do with them. Full terms.