Jeep CJ-5
1955–71

Also called Willys CJ-5 or Kaiser CJ-5

The Jeep CJ-5 (1955–71) left the factory on 28.3 in tall tires and 5.38 axle gears, with an 81 in wheelbase and 45°, 30° and 30° approach, breakover and departure angles. Every number is from the maker's own figures unless the calculators say otherwise. A few figures here are still waiting on a factory document; the calculators mark them.

81 in wheelbase · 22.56 in front · 32 in rear overhang
in
Axle ratio5.38Factory
Crawl ratio44.2:1First × low × axle
Angles45 · 30 · 30°Approach, breakover, departure
Clearance8 inFactory figure

Size

Wheelbase
81 in
Front overhang
22.56 in
Rear overhang
32 in
Height
69 in
Body
Short wheelbase SUV
Stock tires
28.3

Transmissions and low range

3-speed manual (Borg-Warner T-90A)
2.798 · 1.551 · 1
3-speed manual (Borg-Warner T-90C), 1963 on
3.339 · 1.851 · 1
Low range, d18
2.46:1

Axles

Front
Dana/Spicer 25 (to 1965), then 27
Rear
Dana/Spicer 44
5.38 ratio
All trims
Ratios made for it
4.27 · 5.38

Suspension

Front
solid axle on leaf springs
Rear
leaf springs, solid axle
Rear layout
Leaf springs
Front wheel travel
Not published. Know it? Send it in
Rear wheel travel
Not published. Know it? Send it in
Flex (ramp score), stock
Not published. Know it? Send it in

Roof and stability

Roof load limit
No roof load limit published; open body with a canvas top.
Roof
Removable top
Track
48.44 in front, 48.44 in rear unconfirmed
Curb weight
2,274 lb unconfirmed
Most it can weigh (GVWR)
3,750 lb unconfirmed
Payload
about 1,476 lb, GVWR less curb