Jeep CJ-2A
1945–49

Also called Willys CJ-2A

The Jeep CJ-2A (1945–49) left the factory on 28.3 in tall tires and 5.38 axle gears, with an 80 in wheelbase and 38°, 25° and 32° approach, breakover and departure angles. Every number is from the maker's own figures unless the calculators say otherwise. A few figures here are still waiting on a factory document; the calculators mark them.

80 in wheelbase · 21.5 in front · 28.6 in rear overhang
in
Axle ratio5.38Factory
Crawl ratio37.0:1First × low × axle
Angles38 · 25 · 32°Approach, breakover, departure
Clearance8.75 inFactory figure

Size

Wheelbase
80 in
Front overhang
21.5 in
Rear overhang
28.6 in
Height
69 in
Body
Short wheelbase SUV
Stock tires
28.3

Transmissions and low range

3-speed manual (Borg-Warner T-90A)
2.798 · 1.551 · 1
Low range, d18
2.46:1

Axles

Front
Dana/Spicer 25
Rear
Dana/Spicer 41 (early CJ-2A: Dana 23 full-floating)
5.38 ratio
All trims
Ratios made for it
4.88 · 5.38

Suspension

Front
solid axle on leaf springs
Rear
leaf springs, solid axle
Rear layout
Leaf springs
Front wheel travel
Not published. Know it? Send it in
Rear wheel travel
Not published. Know it? Send it in
Flex (ramp score), stock
Not published. Know it? Send it in

Roof and stability

Roof load limit
No roof load limit published; open body with a canvas top.
Roof
Removable top
Track
48.25 in front, 48.25 in rear unconfirmed
Curb weight
2,215 lb unconfirmed
Most it can weigh (GVWR)
3,500 lb unconfirmed
Payload
about 1,285 lb, GVWR less curb