Hummer H2
6.0L, 2003–07
The Hummer H2 (6.0L, 2003–07) left the factory on LT315/70R17 tires (34.4 in tall) and 4.10 axle gears, with a 122.8 in wheelbase. On 37x11.50R17 tires the speedometer reads 60 mph at a true 65 and the engine turns 1,695 rpm in top gear on 4.10 gears; 4.56 gears bring that back near stock. Every number is from the maker's own figures unless the calculators say otherwise. A few figures here are still waiting on a factory document; the calculators mark them.
Where it ranks, stock
Best trim, against every stock 4x4 with that figure · Rank your buildTire upgrades, worked out
2003 H2, 6.0L V8, 4-speed automatic, coil rear, 4.1s, from LT315/70R17| Tire | Height | Under the diffs | Speedo at 65 | RPM at 65 | Gears for daily | In Tire size |
|---|---|---|---|---|---|---|
| 35x11.50R17 | 35.0 in | +0.3 in | 64 mph | 1,792 | Keep 4.1s | In Tire size → |
| 35x12.50R17 | 35.0 in | +0.3 in | 64 mph | 1,792 | Keep 4.1s | In Tire size → |
| 37x11.50R17 | 37.0 in | +1.3 in | 60 mph | 1,695 | 4.56 | In Tire size → |
| 37x12.50R17 | 37.0 in | +1.3 in | 60 mph | 1,695 | 4.56 | In Tire size → |
Stock turns 1,825 rpm at 65 in top gear. Flotation sizes are nominal; most measure a little short mounted.
Trims
2 we have figures forSize
- Wheelbase
- 122.8 in
- Front overhang
- 28.8 in
- Rear overhang
- 38.2 in
- Body
- SUV
- Stock tires
- LT315/70R17
Transmissions and low range
- 4-speed automatic (Hydra-Matic 4L65-E)
- 3.06 · 1.63 · 1 · 0.7
- Low range, borgwarner 4484 full-time, 2.64 low
- 2.64:1
Axles
- 4.1 ratio
- All trims
Suspension
- Front
- double wishbone IFS, torsion bars
- Rear
- solid axle on links, coil springs; rear air springs on some H2s
- Rear layout
- Factory 4-link
- Front wheel travel
- Not published. Know it? Send it in
- Rear wheel travel
- Not published. Know it? Send it in
- Flex (ramp score), stock
- Not published. Know it? Send it in
- Work out yours
- Wheel travel and flex with your parts
Every calculator, set up for the H2
Source: . How we source and check figures.
Use at your own risk. These numbers are estimates from factory figures, to help you plan. Check them against your rig and a qualified shop before you buy, cut, lift or drive on it; we're not liable for what you do with them. Full terms.