Ford F-250
1980–86 4x4
Factory gearing, tires, angles and brakes for the F-250, and what the usual upgrades do to it. Every number is from the maker's own figures unless the calculators say otherwise. A few figures here are still waiting on a factory document; the calculators mark them.
Trims
3 we have figures for| Trim | Tire | Transmission | Axle | Angles | Clearance | Open |
|---|---|---|---|---|---|---|
| F-250 4x4 (8.00x16.5D tires) | 30.0 | 4-speed manual, 4-speed manual, 3-speed automatic | — | 38* · 20* · 27* | 8.1 in | Use → |
| F-250 SuperCab 4x4 (opt. tire) (8.75x16.5E tires) | 30.4 | 4-speed manual, 4-speed manual, 3-speed automatic | — | 38* · 20* · 27* | 8.1 in | Use → |
| F-250 HD 4x4 (9.50x16.5E tires) | 31.2 | 4-speed manual, 4-speed manual, 3-speed automatic | — | 38* · 20* · 27* | 8.1 in | Use → |
* The maker doesn’t publish this figure for that trim, so it shows the closest trim’s (same tire where we have one), or a close relative’s that shares the same body or front end. Hover the star to see which.
Size
- Wheelbase
- 133 in to 155 in
- Front overhang
- 28.66 in
- Rear overhang
- 46.6 in
- Height
- 80 in
- Body
- Pickup
- Stock tires
- 30.0, 30.4, 31.2
Transmissions and low range
- 4-speed manual (New Process NP435, 6.69 low)
- 6.69 · 3.34 · 1.79 · 1
- 4-speed manual (BorgWarner T-18)
- 6.32 · 3.09 · 1.69 · 1
- 4-speed manual (BorgWarner T-19, HD Ford)
- 6.32 · 3.09 · 1.68 · 1
- 3-speed automatic (Cruise-O-Matic / SelectShift, C6)
- 2.46 · 1.46 · 1
- Low range, np208
- 2.61:1
- Low range, bw1345
- 2.72:1
Axles
- Front
- Dana 44 TTB (F-250) / Dana 60 solid (F-250 HD, unverified)
- Rear
- 5,300-lb (F-250) / 6,250-lb (F-250 HD) full-floating rear; model names unverified
Brakes
- Front rotor
- 12.56 in, 319 mm
- Rear drum
- 12.00 in, 305 mm
- Rear
- drum
Suspension
- Front
- Twin Traction Beam on leaf springs (heavy models used solid Dana 60)
- Rear
- leaf springs, solid axle
- Rear layout
- Leaf springs
Fuel economy
- EPA highway, automatic
- 12 mpg
- EPA highway, manual
- 14 mpg
- Rated years
- 1984–1986, 4WD
Aftermarket bumpers
2 listedMakers almost never publish angles, bottom heights or how far a bumper tucks, so these fill in as owners measure them. Measured yours? Add it on the rig page and every owner of this F-250 sees how it does on their tires and lift.
Every calculator, set up for the F-250
Source: oldcarbrochures.com.
Use at your own risk. These calculators are here to help you plan and to inform your decisions, not to sign off on a build. Many numbers are estimates worked out from factory figures, and some factory figures are not yet confirmed. Check every number against your own truck, its manuals and a qualified shop before you buy parts, cut, weld, lift, regear or drive on it. Long Range Desert Tools is not liable for anything you do based on these calculators or their results. The full terms are in our policies.