Dodge Power Wagon
Flat fender, 1946–68
Also called WDX or WM300
The Dodge Power Wagon (Flat fender, 1946–68) left the factory on 31 to 35.5 in tall tires and 5.83 axle gears depending on trim, with a 126 in wheelbase. Every number is from the maker's own figures unless the calculators say otherwise. A few figures here are still waiting on a factory document; the calculators mark them.
Axle ratio5.83Factory
Size
- Wheelbase
- 126 in
- Front overhang
- 31.4 in
- Rear overhang
- 41.6 in
- Height
- 80 in
- Body
- Pickup
- Stock tires
- 31.0, 35.5
Transmissions and low range
- Low range, two-speed (1.96 low)
- 1.96:1
Axles
- Front
- Dodge full-floating, closed knuckle
- Rear
- Dodge full-floating
- 5.83 ratio
- All trims
- Ratios made for it
- 4.89 · 5.83
Suspension
- Front
- solid axle on leaf springs
- Rear
- leaf springs, solid axle
- Rear layout
- Leaf springs
- Front wheel travel
- Not published. Know it? Send it in
- Rear wheel travel
- Not published. Know it? Send it in
- Flex (ramp score), stock
- Not published. Know it? Send it in
- Work out yours
- Wheel travel and flex with your parts
Every calculator, set up for the Power Wagon
Tire sizeBigger tires: speedo, clearance, angles and brakes.Compare tiresRegearHighway RPM on every ratio and mpg.Pick your gearsCrawl ratioHow slow it crawls, against other rigs.Work out crawlSpeedometerWhat it really reads on new tires.Fix your speedoLinksAnti-squat and what a lift does to it.Check your linksClearanceReal angles from a tape, and the bumpers that fit.Measure your anglesBuild sheetEvery part and number on your rig, on one sheet.Start a build sheetLeaderboardsWhere the Power Wagon ranks against every stock rig.See where it ranks
Source: . How we source and check figures.
Use at your own risk. These numbers are estimates from factory figures, to help you plan. Check them against your rig and a qualified shop before you buy, cut, lift or drive on it; we're not liable for what you do with them. Full terms.